Chris De Herrera's Windows CE Website

About
Discuss.Pocket PC FAQ Forum

Add Pocket PC FAQ to your Favorites
RSS    RSS Feeds
Wiki    Lost?
Custom Search
Subscribe    Print
Miscellaneous
Table of Contents
Mobile Format
News

[an error occurred while processing this directive]


 
Pocket PC Magazine Best Site

Website Awards
Website Updates

By Chris De Herrera 
Copyright 1998-2007
 All Rights Reserved
A member of the Talksites Family of Websites

Windows and Windows CE are trademarks of Microsoft
Corporation
and are used
under license from owner.
CEWindows.NET is not
associated with Microsoft 
Corporation.

All Trademarks are owned
by their respective companies.

Windows Mobile Device Center - OneCare Firewall Configuration
By Eric Chew and Chris De Herrera, Copyright 2007
 Version 1.00  Revised 2/11/2007

[an error occurred while processing this directive]

Introduction

This FAQ covers how to configure the firewall included with OneCare to allow you to sync with Windows Mobile Device Center (WMDC).  To configure WMDC for use with Microsoft OneCare by following these steps:

OneCare currently (as of 2/1/07) doesn�t automatically configure it's firewall to support WMDC.

Here are the steps to configure OneCare to work with WMDC�

Open OneCare and choose Change OneCare Settings

Click Firewall tab

Select Advanced Settings.

Click Add

WMDC uses the following programs to communicate via TCP/IP:

C:\Windows\WindowsMobile\wmdHost.exe

Select the Ports and Protocols tab�

Then Add�

In the Name call it WMDC 990 Inbound

Leave the Protocol set to TCP and add 990 to port ranges (like below).

Repeat the above add process 5 more times for the following ports�

Port Protocol Connections for this protocol or port range:

Port Protocol Direction
990 TCP Inbound
999 TCP Inbound
5678 TCP Inbound
5721 TCP Inbound
26675 TCP Inbound
5679 UDP Outbound

Add one more port with the following settings like this�

And click ok when done. Once all 6 ports have been added, the firewall settings screen should look like this�

When complete, click ok all the way out and exit the OneCare settings screen. You should be all set to Sync using WMDC!

[an error occurred while processing this directive]

Return to Chris De Herrera's Windows CE Website