 |
Chris De Herrera's Windows CE Website |
|---|---|
About |
|
| By Chris De Herrera Copyright 1998-2007 All Rights Reserved A member of the Talksites Family of Websites Windows and
Windows CE are trademarks of
Microsoft All Trademarks are owned |
Casio Cassiopeia E-10/11 Power FAQ
By Casio
[an error occurred while processing this directive]
As a service to the Windows CE community, Pocket PC FAQ is offering
these files provided by Casio. No affiliation exists between Pocket PC FAQ
and Casio USA, Inc.
P. 1. CPU locks up randomly. 2. No touch panel entry. 3. Random
communication Error messages.
S. The ACL (Automatic Power On Clear) cycle may not have been done
effectively before using the unit for the first time. A) Remove both the
main batteries and the backup battery (this will erase anything that was
entered in the unit). B) Wait five minutes. C) Load the main batteries. D)
Wait five seconds. E) Load the backup battery. Customers may be making the
mistake of removing the backup battery's protection insulator prior to
pressing Reset button.
A. Make sure the switch near the battery compartment is in the LOCK
position.
A. To conserve batteries, turn off your sound, avoid letting the LED
flash for long periods of time, and plug the device into AC power as much
as possible.
A. Main battery power may drop down to the "Low" or
"Very Low" when the backlight is on or playback the sound under
the low power condition. Battery mark will blink under this condition,
however it will go back to "Good" condition. To maximize the
battery life, try to use the AC adapter if possible and minimize the
volume or avoid using the backlight as much as you can.
A. The E-11 comes with the AC adapter. However, you can also use the
A-20's AC adapter.
Q. I just installed batteries into my unit and it will not power on.
Q. How can I make my batteries last longer?
Q. Why does the main battery condition change intermittently between
"Low" and "Good"?
Q. Can I use the A-20's AC adapter?
[an error occurred while processing this directive]